This browser does not support the video element.
UV laser etching machines with different power ratings (5W, 10W, and 15W) for wire applications. These machines can be used for a variety of tasks, including marking, engraving, and cutting on wires and cables.
It is best suited for applications that require fine and precise markings, such as serial numbers, logos, or QR codes on wires.
3W 5W 10W UV Laser etching machine can handle a wider range of materials and can be used for deeper engraving or cutting on wires.This machine is suitable for applications that require higher contrast and more substantial markings.
Different power levels will offer varying levels of precision and marking speed. Choose the one that best suits your specific requirements.
5W, 10W, or 15W laser engraver or marking machine for wire applications depends on your specific needs and the materials you intend to work with.
Mini design of 3W 5W 10W JPT UV Laser Marking Machine is suitable for more demanding applications where deep engraving, cutting, or high-speed marking on wires is required.
| Model No. | MH-LM300UV | |
Laser Source | UV Laser Engraver Machine | |
Output Power | 3W / 5W / 10W / 15W | |
Wavelength | 355nm | |
Beam quality㎡ | <1.1 | |
Average Output Power | 10khz-400khz | |
Pulse Energy | 2mJ | |
Minimum Line Width | 0.013mm | |
Minimum Character | 0.2 mm | |
Repeatablility | 50μ | |
Marking Scope | 110MMx 110MM / 175MMx 175MM (Optional) | |
Linear Speed | 800 character/ s | |
Marking Linear Speed | ≤12,000mm/s | |
Marking Depth | 0.01-1mm | |
Min. Line Width | 0.012mm | |
Min. Character Size | 0.15mm | |
Repeat Accuracy | ±0.001mm | |
Cooling system | 3W / 5W | 10W / 15W |
Air cooling | Water Cooling | |
Input Power | 0.8KW | |
Compatible files format | PLT, DXF, AI, DST, BMP, PNG, JPG, JPEG, PNA, TIF etc. | |
Power Supply | 220V/50HZ Or 60HZ | |