This browser does not support the video element.
UV laser marking machines are commonly used for high-precision, permanent marking on various materials, including plastics. These machines use a focused beam of ultraviolet light to create precise marks without damaging the material's surface.
The choice of laser power depends on the specific requirements of your marking application. Higher wattage lasers tend to be more expensive.
3W 5W 10W UV can be used for marking logos, serial numbers, barcodes, or other information on USB cables, phone cases, plastic parts, or any other compatible material.
Portable design of 3W 5W 10W JPT UV Laser Marking Machine, you should consider factors such as the materials you'll be marking, the required marking quality, production volume, and your budget. Additionally, make sure the machine complies with safety regulations and has appropriate safety features, as working with lasers requires precautions.
| Model No. | MH-LM300UV | |
Laser Source | UV Laser | |
Output Power | 3W / 5W / 10W / 15W | |
Wavelength | 355nm | |
Beam quality㎡ | <1.1 | |
Average Output Power | 10khz-400khz | |
Pulse Energy | 2mJ | |
Minimum Line Width | 0.013mm | |
Minimum Character | 0.2 mm | |
Repeatablility | 50μ | |
Marking Scope | 110MMx 110MM / 175MMx 175MM (Optional) | |
Linear Speed | 800 character/ s | |
Marking Linear Speed | ≤12,000mm/s | |
Marking Depth | 0.01-1mm | |
Min. Line Width | 0.012mm | |
Min. Character Size | 0.15mm | |
Repeat Accuracy | ±0.001mm | |
Cooling system | 3W / 5W | 10W / 15W |
Air cooling | Water Cooling | |
Input Power | 0.8KW | |
Compatible files format | PLT, DXF, AI, DST, BMP, PNG, JPG, JPEG, PNA, TIF etc. | |
Power Supply | 220V/50HZ Or 60HZ | |