This browser does not support the video element.
The 20W & 30W Mini Cheap Fiber Laser Etcher is an essential piece of equipment for small businesses looking to save time and money. With its light design and highly affordable price, this laser etcher makes it easy to permanently mark metal,such as stainless steel, or plastic surfaces.
It requires only a computer connection and is ready to use with minimal setup time. Plus, it's much more efficient than other approaches – you can get your product marked in no time!
High reaction Speed galvanometer:
Laser Etching Machine Imported scanning system makes the scanning speed is up to 8000MM/S
High Precision:
Re-position precision is 0.001MM
Easily Operating:
Friendly specific marking software supported Windows, users can input and output by computer consistent edit in the both of the precise marking software and therefore the graphic software like AutoCAD, Corel DRAW and Photoshop.
High Reliability:
MTBF>100,000 hours
Energy Saving:
The whole machine consumes less energy, no environmental and noise pollution, and the photoelectric conversion efficiency is as high as 35%
Low Running Cost:
No consumable part. Free maintaining up to 8-10 Years
Model No. | MH-LM200 |
Laser Source Brand | Fiber Laser |
Output Power | 20W / 30W / 50W |
Wavelength | 1060nm |
Beam Quality | <2 |
Repeat Frequency | 10khz-400khz |
Pulse Energy | 2mJ |
Beam Divergence | -0.3 to +0.3mrad |
Laser Class | IV |
Resolution | 18μ |
Repeatablility | 50μ |
Marking Scope | 110MMx 110MM / 175MMx 175MM (Optional) |
Linear Speed | 800 character/ s |
Marking Linear Speed | ≤12,000mm/s |
Marking Depth | Max. 1.0- 1.5mm (hard steel) |
Min. Line Width | 0.012mm |
Min. Character Size | 0.15mm |
Repeat Accuracy | ±0.001mm |
Cooling system | Air cooling |
Input Power | 0.5KW |
Electrical Source | 220V/50HZ Or 60HZ |